A timing overlay that marks turning points directly on the price bars. Using the same seven bandpass cycles, it plots diamonds where each cycle's Bandpass troughs and peaks fall — below price for lows, above for highs, stacked in rows with the shortest cycle nearest price. Diamonds behind the current bar are confirmed historical pivots (your reality check — do they land on real swings?); diamonds ahead are projected future turns, repeated across the whole visible chart.
Each diamond carries a dashed uncertainty band — its "whiskers" — showing the realistic range where the turn could land, based on how much that specific cycle has historically varied. A tight band means a consistent cycle; a wide band means treat it loosely.
Key inputs
Select_Cycle False
Automatic vs. manual cycle lengths (enter your own or values from Spectral Analysis).
Cycle1 … Cycle7 10 … 640
The seven lengths when manual, each roughly double the last.
Cycle_Inputs_In_Bars False
Intraday charts only (when Select_Cycle is True). False = Cycle1 … Cycle7 are in minutes and get divided by your bar interval. True = they’re already in bars and are used as-is — so you can enter cycle lengths straight from the Spectral Analysis indicator without multiplying by your bar interval first.
Show_Lows / Show_Highs —
Independently show or hide the trough and peak diamonds to declutter the chart.
Show_Historical On
Toggles the confirmed past pivots — best left on as your validation tool.
Whiskers 1
Uncertainty-band mode: 1 = observed min/max of the last six measured lengths, 2 = a 95% statistical confidence interval, 3 = a fixed percentage of the cycle length.
WhiskerLowerPct / UpperPct 20 / 30
The band's width below and above the turn (Whiskers mode 3 only) — asymmetric because cycles tend to stretch more than they compress.
LASTCYCLEorMEAN 1
1 = drive projections from the most recent measured length (reactive); 2 = from the average of the last six (smoother).
LookbackBars 24
How many bars back the indicator looks to scale the vertical spacing of the diamond rows — doesn't affect cycle detection. Keep modest, especially on monthly charts.
Bandwidth 0.3
Filter selectivity — a tested balance of selectivity and strength.
Print_Model True
Prints a one-time reference table of the default cycle lengths for every chart type. Informational only.
LicenseKey ""
Paste the license key you receive at purchase — the indicator won't run without it. Each key activates on up to two devices.
DeactivateThisComputer False
Set True to free up this device's license slot (e.g. before moving to a new machine), then set it back to False.
Use the diamonds to spot nesting — several cycles projecting a low or high together — then confirm with the FLD crossover and channel structure before acting. They're a timing overlay, not a standalone buy/sell signal.
